Commit graph

14478 commits

Author SHA1 Message Date
Ian Archer
9758b08bcf hostapd: Add support for setting pbss option from config file
There is currently no support for setting hostapd_bss_config.pbss from a
config file, i.e., it was used only based on automatic logic in
wpa_supplicant. This patch adds a key naturally called "pbss" which can
be used to set it.

Cc: Antony King <antony.king@bluwirelesstechnology.com>
Signed-off-by: Brendan Jackman <brendan.jackman@bluwirelesstechnology.com>
2019-01-21 12:35:59 +02:00
Amit Khatri
cc0f24196b D-Bus: Fix P2P Flush method to clear pending Action frames
If we call p2p_flush from ctrl_iface, before calling p2p_flush() it
calls wpas_p2p_stop_find(). Add the same call to the matching D-Bus
method to clear all pending operations.

Signed-off-by: Amit Khatri <amit7861234@gmail.com>
2019-01-21 12:30:17 +02:00
stonez
fff8da8ace Add a vendor attribution to transfer EVM information
This new QCA vendor attribute indicates the EVM value in netlink.

Signed-off-by: stonez <stonez@codeaurora.org>

:100644 100644 ad5dac2... ede4fc8... M	src/common/qca-vendor.h
2019-01-21 12:28:05 +02:00
Jouni Malinen
3cd0adea26 tests: wpa_supplicant config parsing and storing for new variables
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-12 19:21:45 +02:00
Jouni Malinen
9b8e1f9044 tests: P2P group formation with random interface addresses
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-12 19:18:02 +02:00
Jimmy Chen
a95906f938 P2P: support random interface address
To enhance privacy, generate a random interface for each group.

There are two configurations are introduced:
* p2p_interface_random_mac_addr
  enable interface random MAC address feature, default disable.

Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
2019-01-12 17:58:30 +02:00
Jimmy Chen
9359cc8483 P2P: Support random device address
To enhance privacy, generate a random device address for P2P interface.
If there is no saved persistent group, it generate a new random MAC
address on bringing up p2p0. If there is saved persistent group, it will
use last MAC address to avoid breaking group reinvoke behavior.

There are two configurations are introduced:
* p2p_device_random_mac_addr
  enable device random MAC address feature, default disable.
* p2p_device_persistent_mac_addr
  store last used random MAC address.

Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
2019-01-12 17:55:42 +02:00
Arnout Vandecappelle (Essensium/Mind)
222ff97bc3 tests: start.sh: fix logs/current symlink creation
Since 3bdc651a62, start.sh creates the logs/current symlink even if
LOGDIR was set in the environment, as is the case when using run-all.sh.
However, run-all.sh and start.sh use a separate 'date' invocation so the
resulting string may be different. Usually it is the same because the
two invocations immediately follow each other, *except* if run-all.sh
also does a build. In addition, if the user sets LOGDIR to something
else, the symlink is completely bogus.

Fix this by not relying on the 'date' invocation for creating the
symlink. Instead, use the basename of LOGDIR. To keep things consistent
with current behavior, only create the symlink if LOGDIR points to a
subdirectory of DIR/logs.

The following use cases now work reliably:
* run-all.sh with or without the -B option;
* manually calling start.sh followed by run-tests.py without setting
  LOGDIR.
* manually calling start.sh with LOGDIR set to a subdirectory of logs
  and calling run-tests.py without --logdir option (which makes it
  default to logs/current).
* run-all.sh with LOGDIR set to a subdirectory of logs.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-01-12 17:39:59 +02:00
Jouni Malinen
cbf25808b9 tests: Build with various LibreSSL and OpenSSL versions
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-12 17:32:15 +02:00
Stefan Strogin
67d35396cb Fix build with LibreSSL
When using LibreSSL build fails with:

../src/crypto/tls_openssl.o: in function `tls_connection_client_cert':
../src/crypto/tls_openssl.c:2817: undefined reference to `SSL_use_certificate_chain_file'
collect2: error: ld returned 1 exit status
make: *** [Makefile:1901: wpa_supplicant] Error 1

There is no such function in LibreSSL.

Signed-off-by: Stefan Strogin <stefan.strogin@gmail.com>
2019-01-12 15:26:07 +02:00
Peng Xu
5a3319ab1b P2P: Add 802.11ax support for P2P GO
An optional parameter "he" is added to p2p_connect, p2p_group_add, and
p2p_invite to enable 11ax HE support. The new p2p_go_he=1 configuration
parameter can be used to request this to be enabled by default.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-12 13:09:39 +02:00
Sunil Dutt
9da1641a4c Clarify documentation of avoid channels expectations
The vendor command QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY was defined
to carry the list of avoid frequencies that aim to avoid any
interference with other coexistencies. This recommendation was followed
strictly by trying to prevent WLAN traffic on the impacted channels.

This commit refines the expectation of the interface by defining this
avoid channel list to allow minimal traffic but not heavier one. For
example, P2P may still be able to use avoid list frequencies for P2P
discovery and GO negotiation if the actual group can be set up on a not
impact channel.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-12 12:39:36 +02:00
Jouni Malinen
8c70c30472 HS 2.0 server: Log new username in eventlog for cert reenroll
Make it easier to find the new username (and the new serial number from
it) when a user entry is renamed at the conclusion of client certificate
re-enrollment sequence.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-10 00:47:04 +02:00
Siva Mullati
11ce7a1bc3 HE: Add MU EDCA Parameter Set element (AP)
Add support for configuring parameters for the MU EDCA Parameter Set
element per IEEE P802.11ax/D3.0.

Signed-off-by: Siva Mullati <siva.mullati@intel.com>
2019-01-08 17:22:43 +02:00
Martin Stanislav
cfb01f58a6 eapol_test: Start the identifier at an initial random value
Start the (EAP request) identifier at an initial random value
as recommended by RFC 3748 in section 4.1 Request and Response
on page 21.

Signed-off-by: Martin Stanislav <ms@uakom.sk>
2019-01-08 13:40:33 +02:00
Jouni Malinen
6bcbda4082 drivers: Set CONFIG_LIBNL32=y automatically based on pkg-config
If the libnl version is not specified explicitly with CONFIG_LIBNL*, try
to check for the most likely case today with pkg-config.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-08 13:31:55 +02:00
Andrey Kartashev
41b747522e drivers: Move libnl related build flags to separate ifdef block
Fix compilation issue if we want to build wpa_supplicant without any
wireless connectivity but only with MACSec support via Linux kernel
driver.

Signed-off-by: Andrey Kartashev <a.s.kartashev@gmail.com>
2019-01-08 13:24:22 +02:00
Mike Siedzik
a07b8a70b5 mka: New MI should only be generated when peer's key is invalid
Two recent changes to MKA create a situation where a new MI is generated
every time a SAK Use parameter set is decoded.  The first change moved
invalid key detection from ieee802_1x_decode_basic_body() to
ieee802_1x_kay_decode_mpkdu():

  commit db9ca18bbf ("mka: Do not ignore MKPDU parameter set decoding failures")

The second change forces the KaY to generate a new MI when an invalid
key is detected:

  commit a8aeaf41df ("mka: Change MI if key invalid")

The fix is to move generation of a new MI from the old invalid key
detection location to the new location.

Fixes: a8aeaf41df ("mka: Change MI if key invalid")
Signed-off-by: Michael Siedzik <msiedzik@extremenetworks.com>
2019-01-08 01:12:02 +02:00
Arend van Spriel
d896874f86 nl80211: Indicate 802.1X 4-way handshake offload in connect
Upon issuing a connect request we need to indicate that we want the
driver to offload the 802.1X 4-way handshake for us. Indicate it if
the driver capability supports the offload.

Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2019-01-08 01:12:02 +02:00
Arend van Spriel
436ee2fd93 drivers: Add separate driver flags for 802.1X and PSK 4-way HS offloads
Allow drivers to indicate support for offloading 4-way handshake for
either IEEE 802.1X (WPA2-Enterprise; EAP) and/or WPA/WPA2-PSK
(WPA2-Personal) by splitting the WPA_DRIVER_FLAGS_4WAY_HANDSHAKE flag
into two separate flags.

Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2019-01-08 01:12:02 +02:00
Jouni Malinen
78a9ba72d0 tests: DFS CAC interrupted and restarted
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-08 01:12:02 +02:00
Zefir Kurtisi
10de40c0c8 DFS: Restart pending CAC on interface enable
When an interface is re-enabled after it was disabled during CAC, it
won't ever get active since hostapd is waiting for a CAC_FINISHED while
kernel side is waiting for a CMD_RADAR_DETECT to start a CAC.

This commit checks for a pending CAC when an interface is enabled and if
so restarts its DFS processing.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
2019-01-08 01:11:56 +02:00
Jouni Malinen
72d909e749 tests: Supported operating classes with constraints
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-08 00:20:10 +02:00
Ben Greear
b06d60a902 Use freq_list to constrain supported operating class information
If a station is configured to allow only a subset of frequencies for an
association, the supported operating classes may need to be more limited
than what the hardware supports.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2019-01-08 00:20:04 +02:00
Ben Greear
cb828507f5 Use disable_ht/vht to constrain supported operating class information
If user has disabled HT or VHT, those related operating classes
should not be advertised as supported.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2019-01-08 00:19:07 +02:00
Bo Chen
27ebadccfb RADIUS client: Cease endless retry for message for multiple servers
In the previous RADIUS client implementation, when there are multiple
RADIUS servers, we kept trying the next server when the current message
can not be acked. It leads to endless retry when all the RADIUS servers
are down.

Fix this by keeping a counter for the accumulated retransmit attempts
for the message, and guarantee that after all the servers failover
RADIUS_CLIENT_MAX_FAILOVER times the message will be dropped.

Another issue with the previous code was that the decision regarding
whether the server should fail over was made immediately after we send
out the message. This patch guarantees we consider whether a server
needs failover after pending ack times out.

Signed-off-by: Bo Chen<bochen@meraki.com>
2019-01-07 23:38:18 +02:00
Jouni Malinen
08e6721e87 tests: Remove MIB counter check from radius_auth_unreachable2
This is in preparation for an implementation change that results in this
unreachable server case not incrementing radiusAuthClientAccessRequests.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-07 23:38:18 +02:00
Kiran Kumar Lokere
166ab0b780 QCA vendor commands to configure HE +HTC capability and OM control Tx
Define QCA vendor command attributes to configure HE +HTC support and
HE operating mode control transmission. This is used to configure the
testbed device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-07 22:55:20 +02:00
Jouni Malinen
89d79150ac Avoid forward references to enum types in ieee802_11_common.h
These are not allowed in ISO C++ (and well, not really in ISO C either,
but that does not result in compiler warning without pedantic
compilation).

Since ieee802_11_common.h may end up getting pulled into C++ code for
some external interfaces, it is more convenient to keep it free of these
cases. Pull in ieee802_11_defs.h to get enum phy_type defined and move
enum chan_width to common/defs.h (which was already pulled in into
src/drivers/driver.h and src/common/ieee802_11_common.h).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-07 17:26:40 +02:00
Jouni Malinen
5d2e9d1cf8 tests: Reduce mesh result code duplication with helper functions
These checks were repeated in almost every test case, so use helper
functions to get rid of duplicated (copy-pasted) code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-07 00:25:08 +02:00
Jouni Malinen
dc1aaa5d07 tests: Mesh with VHT20 and VHT40
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-07 00:01:23 +02:00
Peter Oh
e5a9b1e8a3 mesh: Implement use of VHT20 config in mesh mode
Mesh in VHT mode is supposed to be able to use any bandwidth that VHT
supports, but there was no way to set VHT20 although there are
parameters that are supposed to be used. This commit along then previous
commit for VHT_CHANWIDTH_USE_HT makes mesh configuration available to
use any bandwidth with combinations of existing parameters like shown
below.

VHT80:
  default
  do not set any parameters
VHT40:
  max_oper_chwidth = 0
VHT20:
  max_oper_chwidth = 0
  disable_ht40 = 1
HT40:
  disable_vht = 1
HT20:
  disable_ht40 = 1
disable HT:
  disable_ht = 1

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-06 23:49:40 +02:00
Peter Oh
806db174fd mesh: Add VHT_CHANWIDTH_USE_HT to max_oper_chwidth
Channel width in VHT mode refers HT capability when the width goes down
to below 80 MHz, hence add checking HT channel width to its max
operation channel width. So that mesh has capability to select bandwidth
below 80 MHz.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-06 23:43:40 +02:00
Jouni Malinen
06809f618d tests: WPA2-PSK+FT AP and workaround for incorrect STA behavior
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-06 21:20:34 +02:00
Janusz Dziedzic
bb35e2d214 hostapd: Work around an interop connection issue in FT-PSK + WPA-PSK
While the AP is configured to enable both FT-PSK and WPA-PSK, an HP
printer request both AKMs (copied from AP?) in Association Request
frame, but don't add MDIE and don't use FT. This results in the
connection failing.

Next in logs we see:

RSN: Trying to use FT, but MDIE not included
IE - hexdump(len=26): 30 18 01 00 00 0f ac 04 01 00 00 0f ac 04
                      02 00 00 0f ac 02 00 0f ac 04 00 00

This is seen with some HP and Epson printers. Work around this by
stripping FT AKM(s) when MDE is not present and there is still a non-FT
AKM available.

Signed-off-by: Janusz Dziedzic <janusz@plumewifi.com>
2019-01-06 21:10:08 +02:00
Jouni Malinen
2e71d0415b tests: disable_sgi with VHT
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-06 20:59:36 +02:00
Ben Greear
fd83a80815 wpa_supplicant: Allow disabling VHT SGI capability
This provides similar features to what was already available for HT
overrides. Probe Request frames look correct, and VHT capabilities shown
in debugfs look as expected.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2019-01-06 20:59:36 +02:00
Jouni Malinen
02f52ab6f5 Use lchown() instead of chown() for self-created files
There is no need to allow symlink dereferencing in these cases where a
file (including directories and sockets) are created by the same
process, so use the safer lchown() variant to avoid leaving potential
windows for something external to replace the file before the chown()
call. The particular locations used here should not have write
permissions enabled for processes with less privileges, so this may not
be needed, but anyway, it is better to make these more restrictive
should there be cases where directory permissions are not as expected
for a good deployment.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-06 20:28:04 +02:00
Jouni Malinen
b686745c76 Android: Harden wpa_ctrl_open2() against potential race conditions
The Android-specific chmod and chown operations on the client socket
(for communication with wpa_supplicant) did not protect against file
replacement between the bind() and chmod()/chown() calls. If the
directory in which the client socket is created (depends a bit on the
version and platform, but /data/misc/wifi/sockets is commonly used)
allows write access to processes that are different (less privileged)
compared to the process calling wpa_ctrl_open2(), it might be possible
to delete the socket file and replace it with something else (mainly, a
symlink) before the chmod/chown operations occur. This could have
resulted in the owner or permissions of the target of that symlink being
modified.

In general, it would be safest to use a directory which has more limited
write privileges (/data/misc/wifi/sockets normally has 'wifi' group
(AID_WIFI) with write access), but if that cannot be easily changed due
to other constraints, it is better to make wpa_ctrl_open2() less likely
to enable this type of race condition between the operations.

Replace chown() with lchown() (i.e., a version that does not dereference
symlinks) and chmod() with fchmod() on the socket before the bind() call
which is also not going to dereference a symlink (whereas chmod()
would). lchown() is a standard operation, but the fchmod() on the socket
is less so (unspecified behavior in some systems). However, it seems to
work on Linux and in particular, on Android, where this code is
executed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-06 20:20:20 +02:00
Jouni Malinen
9aac73121b tests: More workarounds for cfg80211 regulatory state clearing (ap_open)
Add even more workarounds for cfg80211 regulatory state clearing since
these DFS test cases seem to be the most likely ones to fail due to
country=98 issues.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-06 13:21:19 +02:00
Jouni Malinen
df71e16021 tests: More workarounds for cfg80211 regulatory state clearing (DFS)
Add even more workarounds for cfg80211 regulatory state clearing since
these DFS test cases seem to be the most likely ones to fail due to
country=98 issues.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-06 13:16:17 +02:00
Dmitry Lebed
59bf0f9713 DFS: Add supported channel bandwidth checking
While selecting a new channel as a reaction to radar event we need to
take into account supported bandwidth for each channel provided via
nl80211. Without this modification hostapd might select an unsupported
channel that would fail during AP startup.

Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
2019-01-06 12:09:21 +02:00
Dmitry Lebed
75ce63e063 ACS: Add supported channel bandwidth checking
While doing automatic channel selection we need to take into account
supported bandwidth for each channel provided via nl80211. Without this
modification hostapd might select an unsupported channel which would
fail during AP startup.

Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
2019-01-06 12:04:15 +02:00
Dmitry Lebed
ce6d9ce15b hostapd: Add supported channel bandwidth checking infrastructure
This adds checks to common code to verify supported bandwidth options
for each channel using nl80211-provided info. No support of additional
modes is added, just additional checks. Such checks are needed because
driver/hardware can declare more strict limitations than declared in the
IEEE 802.11 standard. Without this patch hostapd might select
unsupported channel and that will fail because Linux kernel does check
channel bandwidth limitations.

Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
2019-01-06 11:54:34 +02:00
Dmitry Lebed
4299ad826d nl80211: Add supported bandwidth parsing
Add NL80211_FREQUENCY_ATTR_NO_* channel attributes parsing. This is
needed for correct checking if channel is available in a particular
bandwidth.

Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
2019-01-06 11:35:31 +02:00
Jouni Malinen
1185294944 tests: ACS for 160 MHz channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-06 01:45:26 +02:00
Dmitry Lebed
22dcafc20c ACS: Add support for 160 MHz bandwidth
Add support for 160 MHz BW channels to automatic channel selection
algorithm. Only 36 and 100 channels are supported as 160 MHz channels.

Signed-off-by: Dmitry Lebed <lebed.dmitry@gmail.com>
2019-01-06 01:44:06 +02:00
Jouni Malinen
24451276a1 tests: More workarounds for cfg80211 regulatory state clearing (WNM)
Add even more workarounds for cfg80211 regulatory state clearing since
these WNM test cases seem to be the most likely ones to fail due to
country=98 issues.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-05 22:06:03 +02:00
Jouni Malinen
441ba1a3e3 dbus: Fix build without CONFIG_WNM=y
wpa_s->bss_tm_status is within #ifdef CONFIG_WNM, so need to access it
through matching condition.

Fixes: 80d06d0ca9 ("dbus: Export BSS Transition Management status")
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-05 18:44:17 +02:00
Jouni Malinen
aae0eece5f EAP-TLS: Update Session-Id derivation with TLS v1.3
Move to the version used in draft-ietf-emu-eap-tls13-03.txt, i.e.,
include the 0x0D prefix and use a different TLS-Exporter() label string.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-05 18:00:26 +02:00