Commit graph

13199 commits

Author SHA1 Message Date
Jouni Malinen
57dc90e386 tests: wpa_supplicant AP mode - open network with client isolation
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 17:57:45 +02:00
Danilo Ravotto
19e20c14fb Add ap_isolate configuration option for wpa_supplicant AP mode
Allow client isolation to be configured with ap_isolate inside
wpa_supplicant configuration file.

Signed-off-by: Danilo Ravotto <danilo.ravotto@zirak.it>
2018-02-17 17:48:31 +02:00
Jouni Malinen
e51e49fccc tests: Fix dbus_set_global_properties failure if run twice
Clear the model_name parameter back to the default (empty string) at the
beginning and the end of dbus_set_global_properties to avoid failures if
the test case is run multiple times.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 17:41:57 +02:00
Jouni Malinen
50d7cdedae tests: Make dbus_p2p_discovery more robust
Ignore any unexpected deviceLost event before the peer devices has been
discovered. This works around issues where the previous test case
terminates before the D-Bus events have been fully delivered. This could
happen, e.g., when running dbus_p2p_discovery twice in a row.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 17:21:05 +02:00
Vamsi Krishna
a4016163e8 Extend APF interface for read/write and enable/disable ops
Enhance QCA vendor specific APF interface to support write/read program
and/or data and to enable/disable APF feature.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-15 00:26:06 +02:00
Jouni Malinen
b2e4074ca3 OpenSSL: Fix EAP-FAST with OpenSSL 1.1.1-pre1
TLS v1.3 needs to be explicitly disabled to allow cipher suite selection
for EAP-FAST to work with OpenSSL builds that include TLS v1.3 support.
Without this, OpenSSL refuses to generate ClientHello due to the cipher
suite list including only ciphers allowed with older versions than TLS
v1.3.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-14 12:40:33 +02:00
Jouni Malinen
a8ec0b8ccc tests: sigma_dut controlled STA as DPP PKEX responder and error case
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-13 00:24:50 +02:00
Ashok Ponnaiah
a22e235fd0 OWE: Add testing RSNE for OWE assoc response with driver SME/MLME
Allow RSNE to be overwritten for testing purposes also in the
driver-based SME/MLME case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-12 21:31:04 +02:00
Jouni Malinen
aca4d84e3d DPP: Use wildcard BSSID in GAS query frames
Force use of the wildcard BSSID address in GAS query frames with DPP
regardless of how the gas_address3 configuration parameter is set. DPP
specification mandates this and the use of GAS here is really outside
the context of a BSS, so using the wildcard BSSID makes sense even for
the corner case of Configurator running on a known AP (where IEEE 802.11
standard would allow the BSSID of the AP to be used).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:42:00 +02:00
Jouni Malinen
0887215d94 nl80211: Do not try to add too large NL80211_ATTR_PMK for set/del PMKSA
The current cfg80211 limit for the maximum NL80211_ATTR_PMK length is
48, so anything larger than that will result in the operation completely
failing. Since the PMKSA entries can be used without the PMK for most
purposes (the main use case for PMK currently is offloaded FILS
authentication), try to go ahead by configuring only the PMKID for the
case where 64-octet PMK is needed (which is currently limited to only
DPP with NIST P-521 and brainpoolP512r1 curves). This can fix DPP
connections with drivers that expect to get the PMKID through this
interface while still leaving the actual 4-way handshake for user space.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:16:53 +02:00
Jouni Malinen
e7f6e6ee1b nl80211: Print NL80211_CMD_{SET,DEL}_PMKSA failures in debug log
This makes it easier to notice if the driver operation to manage PMKSA
cache information fails unexpectedly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:10:07 +02:00
Purushottam Kushwaha
717f236dce wpadebug: Add support for QR Code scanning and display via zxing
Enhance wpadebug application to support scanning and displaying of QR
codes. This depends on a third-party source: zxing
(https://github.com/zxing/zxing).

Shell command to launch scanner/viewer via wpadebug is:
>adb root
>adb shell

Scanner:
>am start -n w1.fi.wpadebug/w1.fi.wpadebug.QrCodeScannerActivity
Viewer:
>am start -n w1.fi.wpadebug/w1.fi.wpadebug.QrCodeDisplayActivity

QR code string input/output file would be generated in
'/sdcard/wpadebug_qrdata.txt' in the device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-08 18:39:41 +02:00
Jouni Malinen
8f7a50a63e tests: MAC ACL accept/deny management
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 19:45:32 +02:00
Tamizh chelvam
3988046de5 hostapd: Dynamic MAC ACL management over control interface
Previously, MAC ACL could be modified only through file operations
(modify accept/deny_mac_file and reload it to hostapd). Extend this to
allow MAC ACL to be modified and displayed through new control interface
commands:

ACCEPT_ACL <subcmd> [argument]
DENY_ACL <subcmd> [argument]

subcmd: ADD_MAC <addr>[ VLAN_ID=<id>]|DEL_MAC <addr>|SHOW|CLEAR

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
2018-02-07 19:45:21 +02:00
Jouni Malinen
6a252ece24 DPP: Fix GAS query removal race condition on DPP_STOP_LISTEN
If a DPP_STOP_LISTEN call happens to be received when there is a pending
gas-query radio work that has not yet been started, it was possible for
gas_query_stop() to go through gas_query_done() processing with
gas->work == NULL and that ended up with the pending GAS query getting
freed without removing the pending radio work that hold a reference to
the now freed memory. Fix this by removing the pending non-started radio
work for the GAS query in this specific corner case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 18:03:58 +02:00
Jouni Malinen
27a8d93b07 tests: Make dpp_qr_code_curve_select more robust
Wait for the configuration exchange to complete before issuing the
DPP_STOP_LISTEN command to avoid confusing sequence of operation between
the ongoing and immediately following DPP exchanges.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 17:09:20 +02:00
Jouni Malinen
4370ffc0c4 tests: DPP and PKEX on 5 GHz
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 16:58:52 +02:00
Jouni Malinen
3b50f8a460 DPP: PKEX initiation on other bands
Add support for wpa_supplicant to try to initiate PKEX on 5 GHz and 60
GHz bands in addition to the previously available 2.4 GHz case. If no
response from a peer device is seen on the 2.4 GHz band (channel 6) for
the five attempts, try the other PKEX channels (5 GHz channels 44 and
149; and 60 GHz channel 2) if they are supported and allowed for
initiating radiation.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 16:56:43 +02:00
Jouni Malinen
fc031b7ea7 tests: Make owe_transition_mode_multi_bss more robust
Fix bssid2 value to make scanning more reliable for the second OWE BSS.
In addition, reorder the STA status checks to happen before the data
connectivity check to get more accurate failure reason into the log if
the test case fails.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-07 13:45:48 +02:00
Jouni Malinen
659ac96d7f ieee802_11_mgmt: Handle frame info more consistently
Check for the fi parameter to be non-NULL before trying to fetch the
ssi_signal information similarly to how the fi->freq was already
handled. While the meta information is supposed to be available, it
looks like there is at least one corner case where fi == NULL could be
used (Authentication frame reprocessing after RADIUS-based ACL).

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-07 12:34:41 +02:00
Ashok Ponnaiah
458d8984de SAE: Reject request with mismatching PMKID (no PMKSA cache entry)
Reject SAE association request when PMKID is included in the RSNE, but
the corresponding PMKSA is not available in the AP.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-07 12:24:36 +02:00
Kiran Kumar Lokere
5ac4346426 Define new QCA vendor sub command for wifi test configuration
Define a new QCA vendor sub command for configuring the device with wifi
test configuration. Add new test config attributes for this sub command
that are used to configure the device for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 12:11:47 +02:00
Jouni Malinen
e129e6bd27 tests: sigma_dut DPP roles incompatible
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 22:08:21 +02:00
Jouni Malinen
70e1901371 DPP: Require use of PMF for DPP AKM
Previously, wpa_supplicant set PMF as optional for the DPP AKM since
there was no clear statement about this requirement in the tech spec.
Now that this requirement has been added, update the implementation to
match. In addition, set ssid->ieee80211w using the actual enum
mfp_options values instead of magic constants to make this a bit more
readable.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 22:08:21 +02:00
Jouni Malinen
3e3d634fa7 tests: Enable PMF in sigma_dut DPP tests
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 22:08:21 +02:00
Jouni Malinen
2fec710ac5 tests: Use PMF in DPP with legacy PSK/SAE cases
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 20:52:44 +02:00
Ashok Ponnaiah
79ce2d519b OWE: Rename function to match use (driver-SME/MLME)
This function is used to process a (Re)Association Request frame, so
rename it appropriately to mention assoc_req instead of auth_req.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-06 20:27:41 +02:00
Ashok Ponnaiah
759da93a89 OWE: Check for ECDH availability before use (driver-SME/MLME)
Verify that the STA has ECDH data available before trying to use this
data to add the OWE DH Params element.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-06 20:25:41 +02:00
Ashok Ponnaiah
af65ef28f4 OWE: Add RSNE when not using PMKSA caching (driver-SME/MLME)
RSNE needs to be added both with and without use of PMKSA caching.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-06 20:22:53 +02:00
Ashok Ponnaiah
5850cba384 OWE: Support DH groups 20 and 21 with driver-SME/MLME
This was already the case with the hostapd-based SME/MLME
implementation, but the OWE DH Param element construction for the
driver-based SME/MLME needed a matching change to set the group
properly.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-06 20:20:22 +02:00
Jouni Malinen
05e5c0e554 tests: Run owe test with PMF required
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-06 18:55:18 +02:00
Jouni Malinen
0dc3c5f2ee tests: WPA2-PSK-FT AP with PSK from a file
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-04 12:40:03 +02:00
Michal Kazior
f9854c183d hostapd: Fix wpa_psk_file support for FT-PSK
For FT-PSK sm->xxkey was populated with only the first password on the
linked list (i.e., last matching password in the wpa_psk_file) in
INITPSK. This caused only that password to be recognized and accepted.
All other passwords were not verified properly and subsequently
prevented clients from connecting.

Hostapd would report:

 Jan 30 12:55:44 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
 Jan 30 12:55:44 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: received EAPOL-Key frame (2/4 Pairwise)
 Jan 30 12:55:44 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: invalid MIC in msg 2/4 of 4-Way Handshake
 Jan 30 12:55:45 hostapd: ap0: STA xx:xx:xx:xx:xx:xx WPA: EAPOL-Key timeout

Signed-off-by: Michal Kazior <michal@plumewifi.com>
2018-02-04 12:39:23 +02:00
Jouni Malinen
3bd35b6816 wpa_supplicant: Fix parsing errors on additional config file
If the -I<config> argument is used and the referenced configuration file
cannot be parsed, wpa_config_read() ended up freeing the main
configuration data structure and that resulted in use of freed memory in
such an error case. Fix this by not freeing the main config data and
handling the error case in the caller.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-04 12:20:13 +02:00
Dmitry Shmidt
9c5fe742a2 wpa_supplicant: Free config only if it was allocated in same call
If option -I:config points to a non-existing file, the the previously
allocated config must not be freed. Avoid use of freed memory in such an
error case by skipping the incorrect freeing operation.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2018-02-04 12:13:12 +02:00
Adiel Aloni
946ed13c98 tests: Enable device PS before sending PS-Poll
Linux kernel commit c9491367b759 ("mac80211: always update the PM state
of a peer on MGMT / DATA frames") enforces the AP to check only
mgmt/data frames PM bit, and to update station's power save accordingly.
When sending only a PS-Poll (control frame) the AP will ignore the PM
bit. As the result, the partial virtual bitmap will not be updated, and
the test ap_open_disconnect_in_ps will fail on tshark check. Since the
test needs only the TIM to be updated, setting PS enabled will send NDP
that will signal that the station is sleeping. Sending PS-Poll to enable
power save is not correct, according to the following standard
statement: "A PS-Poll frame exchange does not necessarily result in an
Ack frame from the AP, so a non-AP STA cannot change power management
mode using a PS-Poll frame."

Signed-off-by: Adiel Aloni <adiel.aloni@intel.com>
2018-02-04 12:06:11 +02:00
Jouni Malinen
9f8d459d4c OWE: Fix association IEs for transition mode open AP connection
The special case of returning from wpa_supplicant_set_suites() when OWE
transition mode profile is used for an open association did not clear
the wpa_ie buffer length properly. This resulted in trying to use
corrupted IEs in the association request and failed association
(cfg80211 rejects the request or if the request were to go out, the AP
would likely reject it).

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-04 11:55:01 +02:00
Simon Dinkin
c6096c6eef wpa_cli: Enable add/remove/get vendor elements without P2P
This functionality can be used regardless of P2P and should not be under
the ifdef of CONFIG_P2P.

Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-02-03 12:44:20 +02:00
Simon Dinkin
d1e3d40d04 common: Fix the description of wpa_ctrl_request() function
The blocking timeout of this function was changed from 2 seconds to 10
seconds in this commit 1480633f ("Use longer timeout in
wpa_ctrl_request()"), but the description was never changed accordingly.

Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-02-03 12:42:15 +02:00
David Messer
82424732af Fix compiler issue with CONFIG_TESTING_OPTIONS
Use the preprocessor conditional "ifdef" instead of "if" before
CONFIG_TESTING_OPTIONS to prevent an issue on build systems that treat
undefined preprocessor identifiers as an error.

Signed-off-by: David Messer <david.messer@garmin.com>
2018-02-03 12:41:09 +02:00
Vasyl Vavrychuk
ebf4043739 D-Bus: Report error on starting P2P find
Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
2018-02-03 12:25:32 +02:00
Jouni Malinen
66b9f3ca8a wpa_cli: Fix cred_fields[] declaration
This was supposed to be an array of const-pointers to const-char; not
something duplicating const for char and resulting in compiler warnings
with more recent gcc versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-03 12:08:09 +02:00
Sunil Dutt
5ff39c1380 SAE: Support external authentication offload for driver-SME cases
Extend the SME functionality to support the external authentication.
External authentication may be used by the drivers that do not define
separate commands for authentication and association
(~WPA_DRIVER_FLAGS_SME) but rely on wpa_supplicant's SME for the
authentication.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 21:17:55 +02:00
Jouni Malinen
3382224082 tests: SAE with connect command
This does not really work with mac80211_hwsim due to missing offload
support, but at least some minimal extra code coverage can be achieved.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 20:21:46 +02:00
Sunil Dutt
40a68f3384 nl80211: Create a netlink socket handle for the Connect interface
This netlink socket handle owns the connect request and is further used
by the host driver/kernel to request for the external authentication.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 19:02:44 +02:00
Sunil Dutt
ba71cb821a nl80211: Introduce the interface for external authentication
This command/event interface can be used by host drivers that do not
define separate commands for authentication and association but rely on
wpa_supplicant for the authentication (SAE) processing.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 18:51:04 +02:00
Guisen Yang
8678b14faa Add new QCA vendor commands for thermal shutdown
Add new QCA vendor commands and attributes to get thermal information
and send thermal shutdown related commands. Indicates the driver to
enter the power saving mode or resume from the power saving mode based
on the given temperature and thresholds.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 18:35:06 +02:00
Jouni Malinen
99576f6f3c Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2018-01-31.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-02 18:34:14 +02:00
Ashok Ponnaiah
cd483be252 OWE: Use PMKSA caching if available with driver AP MLME
If a matching PMKSA cache entry is present for an OWE client, use it and
do not go through DH while processing Association Rquest frame.
Association Response frame will identify the PMKID in such a case and DH
parameters won't be present.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-01 23:58:46 +02:00
Ashok Ponnaiah
a4668c6812 OWE: Handle unsupported finite cyclic group with driver MLME
Handle OWE unsupported finite cyclic group in (Re)Association Request
frame when not using the hostapd SME/MLME.

Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-02-01 23:51:19 +02:00