From 56ec49c540ba8000a758521bfef9314c4f7e4e55 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 13 Feb 2014 14:35:01 +0200 Subject: [PATCH] Sync with wireless-testing.git include/uapi/linux/nl80211.h This brings in nl80211 definitions as of 2014-02-12. Signed-hostap: Jouni Malinen --- src/drivers/nl80211_copy.h | 52 ++++++++++++++++++++++++++++++++++---- 1 file changed, 47 insertions(+), 5 deletions(-) diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h index 91054fd66..a12e6cae5 100644 --- a/src/drivers/nl80211_copy.h +++ b/src/drivers/nl80211_copy.h @@ -418,8 +418,18 @@ * %NL80211_ATTR_SSID attribute, and can optionally specify the association * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_WIPHY_FREQ_HINT. + * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are + * restrictions on BSS selection, i.e., they effectively prevent roaming + * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT + * can be included to provide a recommendation of the initial BSS while + * allowing the driver to roam to other BSSes within the ESS and also to + * ignore this recommendation if the indicated BSS is not ideal. Only one + * set of BSSID,frequency parameters is used (i.e., either the enforcing + * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict + * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). * Background scan period can optionally be * specified in %NL80211_ATTR_BG_SCAN_PERIOD, * if not specified default background scan configuration @@ -1555,6 +1565,16 @@ enum nl80211_commands { * data is in the format defined for the payload of the QoS Map Set element * in IEEE Std 802.11-2012, 8.4.2.97. * + * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS + * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS + * + * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many + * associated stations are supported in AP mode (including P2P GO); u32. + * Since drivers may not have a fixed limit on the maximum number (e.g., + * other concurrent operations may affect this), drivers are allowed to + * advertise values that cannot always be met. In such cases, an attempt + * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1883,6 +1903,11 @@ enum nl80211_attrs { NL80211_ATTR_QOS_MAP, + NL80211_ATTR_MAC_HINT, + NL80211_ATTR_WIPHY_FREQ_HINT, + + NL80211_ATTR_MAX_AP_ASSOC_STA, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2412,7 +2437,10 @@ enum nl80211_reg_type { * in KHz. This is not a center a frequency but an actual regulatory * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this - * frequency range, in KHz. + * frequency range, in KHz. If not present or 0, maximum available + * bandwidth should be calculated base on contiguous rules and wider + * channels will be allowed to cross multiple contiguous/overlapping + * frequency ranges. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain * for a given frequency range. The value is in mBi (100 * dBi). * If you don't have one then don't send this. @@ -2442,9 +2470,15 @@ enum nl80211_reg_rule_attr { * enum nl80211_sched_scan_match_attr - scheduled scan match attributes * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, - * only report BSS with matching SSID. + * only report BSS with matching SSID. * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a - * BSS in scan results. Filtering is turned off if not specified. + * BSS in scan results. Filtering is turned off if not specified. Note that + * if this attribute is in a match set of its own, then it is treated as + * the default value for all matchsets with an SSID, rather than being a + * matchset of its own without an RSSI filter. This is due to problems with + * how this API was implemented in the past. Also, due to the same problem, + * the only way to create a matchset with only an RSSI filter (with this + * attribute) is if there's only a single matchset with the RSSI attribute. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -3131,6 +3165,7 @@ enum nl80211_key_attributes { * in an array of MCS numbers. * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, * see &struct nl80211_txrate_vht + * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ @@ -3139,6 +3174,7 @@ enum nl80211_tx_rate_attributes { NL80211_TXRATE_LEGACY, NL80211_TXRATE_HT, NL80211_TXRATE_VHT, + NL80211_TXRATE_GI, /* keep last */ __NL80211_TXRATE_AFTER_LAST, @@ -3156,6 +3192,12 @@ struct nl80211_txrate_vht { __u16 mcs[NL80211_VHT_NSS_MAX]; }; +enum nl80211_txrate_gi { + NL80211_TXRATE_DEFAULT_GI, + NL80211_TXRATE_FORCE_SGI, + NL80211_TXRATE_FORCE_LGI, +}; + /** * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band