From 3b365d4e9ab50366055591dd618ab8367a6cbb5f Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 10 Mar 2013 13:06:31 +0200 Subject: [PATCH] Synchronize with wireless-testing.git include/uapi/linux/nl80211.h Signed-hostap: Jouni Malinen --- src/drivers/nl80211_copy.h | 117 +++++++++++++++++++++++++++++++++---- 1 file changed, 106 insertions(+), 11 deletions(-) diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h index c46bb016f..79da87104 100644 --- a/src/drivers/nl80211_copy.h +++ b/src/drivers/nl80211_copy.h @@ -36,7 +36,21 @@ * The station is still assumed to belong to the AP interface it was added * to. * - * TODO: need more info? + * Station handling varies per interface type and depending on the driver's + * capabilities. + * + * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS + * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: + * - a setup station entry is added, not yet authorized, without any rate + * or capability information, this just exists to avoid race conditions + * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid + * to add rate and capability information to the station and at the same + * time mark it authorized. + * - %NL80211_TDLS_ENABLE_LINK is then used + * - after this, the only valid operation is to remove it by tearing down + * the TDLS link (%NL80211_TDLS_DISABLE_LINK) + * + * TODO: need more info for other interface types */ /** @@ -499,9 +513,11 @@ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a * beacon or probe response from a compatible mesh peer. This is only * sent while no station information (sta_info) exists for the new peer - * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On - * reception of this notification, userspace may decide to create a new - * station (@NL80211_CMD_NEW_STATION). To stop this notification from + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, + * @NL80211_MESH_SETUP_USERSPACE_AMPE, or + * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this + * notification, userspace may decide to create a new station + * (@NL80211_CMD_NEW_STATION). To stop this notification from * reoccurring, the userspace authentication daemon may want to create the * new station with the AUTHENTICATED flag unset and maybe change it later * depending on the authentication result. @@ -611,6 +627,18 @@ * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the * event. * + * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, + * i.e. features for the nl80211 protocol rather than device features. + * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. + * + * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition + * Information Element to the WLAN driver + * + * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver + * to the supplicant. This will carry the target AP's MAC address along + * with the relevant Information Elements. This event is used to report + * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -765,6 +793,11 @@ enum nl80211_commands { NL80211_CMD_RADAR_DETECT, + NL80211_CMD_GET_PROTOCOL_FEATURES, + + NL80211_CMD_UPDATE_FT_IES, + NL80211_CMD_FT_EVENT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -884,7 +917,8 @@ enum nl80211_commands { * consisting of a nested array. * * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). - * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. + * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link + * (see &enum nl80211_plink_action). * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path * info given for %NL80211_CMD_GET_MPATH, nested attribute described at @@ -1167,10 +1201,10 @@ enum nl80211_commands { * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver * allows auth frames in a mesh to be passed to userspace for processing via * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. - * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as - * defined in &enum nl80211_plink_state. Used when userspace is - * driving the peer link management state machine. - * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in + * &enum nl80211_plink_state. Used when userspace is driving the peer link + * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or + * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. * * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy * capabilities, the supported WoWLAN triggers @@ -1368,6 +1402,18 @@ enum nl80211_commands { * advertised to the driver, e.g., to enable TDLS off channel operations * and PU-APSD. * + * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see + * &enum nl80211_protocol_features, the attribute is a u32. + * + * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports + * receiving the data for a single wiphy split across multiple + * messages, given with wiphy dump message + * + * @NL80211_ATTR_MDID: Mobility Domain Identifier + * + * @NL80211_ATTR_IE_RIC: Resource Information Container Information + * Element + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1654,6 +1700,15 @@ enum nl80211_attrs { NL80211_ATTR_STA_CAPABILITY, NL80211_ATTR_STA_EXT_CAPABILITY, + NL80211_ATTR_PROTOCOL_FEATURES, + NL80211_ATTR_SPLIT_WIPHY_DUMP, + + NL80211_ATTR_DISABLE_VHT, + NL80211_ATTR_VHT_CAPABILITY_MASK, + + NL80211_ATTR_MDID, + NL80211_ATTR_IE_RIC, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2412,8 +2467,10 @@ enum nl80211_mesh_power_mode { * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh * point. * - * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open + * peer links when we detect compatible mesh peers. Disabled if + * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are + * set. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames * containing a PREQ that an MP can send to a particular destination (path @@ -2559,6 +2616,9 @@ enum nl80211_meshconf_params { * vendor specific synchronization method or disable it to use the default * neighbor offset synchronization * + * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will + * implement an MPM which handles peer allocation and state. + * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use @@ -2571,6 +2631,7 @@ enum nl80211_mesh_setup_params { NL80211_MESH_SETUP_USERSPACE_AUTH, NL80211_MESH_SETUP_USERSPACE_AMPE, NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, + NL80211_MESH_SETUP_USERSPACE_MPM, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, @@ -3307,6 +3368,23 @@ enum nl80211_plink_state { MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 }; +/** + * enum nl80211_plink_action - actions to perform in mesh peers + * + * @NL80211_PLINK_ACTION_NO_ACTION: perform no action + * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment + * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer + * @NUM_NL80211_PLINK_ACTIONS: number of possible actions + */ +enum plink_actions { + NL80211_PLINK_ACTION_NO_ACTION, + NL80211_PLINK_ACTION_OPEN, + NL80211_PLINK_ACTION_BLOCK, + + NUM_NL80211_PLINK_ACTIONS, +}; + + #define NL80211_KCK_LEN 16 #define NL80211_KEK_LEN 16 #define NL80211_REPLAY_CTR_LEN 8 @@ -3456,6 +3534,10 @@ enum nl80211_ap_sme_features { * stations the authenticated/associated bits have to be set in the mask. * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits * (HT40, VHT 80/160 MHz) if this flag is set + * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh + * Peering Management entity which may be implemented by registering for + * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is + * still generated by the driver. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3474,6 +3556,7 @@ enum nl80211_feature_flags { /* bit 13 is reserved */ NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, + NL80211_FEATURE_USERSPACE_MPM = 1 << 16, }; /** @@ -3587,4 +3670,16 @@ enum nl80211_dfs_state { NL80211_DFS_AVAILABLE, }; +/** + * enum enum nl80211_protocol_features - nl80211 protocol features + * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting + * wiphy dumps (if requested by the application with the attribute + * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the + * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or + * %NL80211_ATTR_WDEV. + */ +enum nl80211_protocol_features { + NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, +}; + #endif /* __LINUX_NL80211_H */