diff --git a/hostapd/ChangeLog b/hostapd/ChangeLog
index 9fc05f75e..e73932513 100644
--- a/hostapd/ChangeLog
+++ b/hostapd/ChangeLog
@@ -1,5 +1,95 @@
 ChangeLog for hostapd
 
+????-??-?? - v2.0
+	* added AP-STA-DISCONNECTED ctrl_iface event
+	* improved debug logging (human readable event names, interface name
+	  included in more entries)
+	* added number of small changes to make it easier for static analyzers
+	  to understand the implementation
+	* added a workaround for Windows 7 Michael MIC failure reporting and
+	  use of the Secure bit in EAPOL-Key msg 3/4
+	* fixed number of small bugs (see git logs for more details)
+	* changed OpenSSL to read full certificate chain from server_cert file
+	* nl80211: number of updates to use new cfg80211/nl80211 functionality
+	  - replace monitor interface with nl80211 commands
+	  - additional information for driver-based AP SME
+	* EAP-pwd:
+	  - fix KDF for group 21 and zero-padding
+	  - added support for fragmentation
+	  - increased maximum number of hunting-and-pecking iterations
+	* avoid excessive Probe Response retries for broadcast Probe Request
+	  frames (only with drivers using hostapd SME/MLME)
+	* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
+	* fixed WPS operation stopping on dual concurrent AP
+	* added wps_rf_bands configuration parameter for overriding RF Bands
+	  value for WPS
+	* added support for getting per-device PSK from RADIUS Tunnel-Password
+	* added support for libnl 3.2 and newer
+	* increased initial group key handshake retransmit timeout to 500 ms
+	* added a workaround for 4-way handshake to update SNonce even after
+	  having sent EAPOL-Key 3/4 to avoid issues with some supplicant
+	  implementations that can change SNonce for each EAP-Key 2/4
+	* added a workaround for EAPOL-Key 4/4 using incorrect type value in
+	  WPA2 mode (some deployed stations use WPA type in that message)
+	* added a WPS workaround for mixed mode AP Settings with Windows 7
+	* changed WPS AP PIN disabling mechanism to disable the PIN after 10
+	  consecutive failures in addition to using the exponential lockout
+	  period
+	* added support for WFA Hotspot 2.0
+	  - GAS/ANQP advertisement of network information
+	  - disable_dgaf parameter to disable downstream group-addressed
+	    forwarding
+	* simplified licensing terms by selecting the BSD license as the only
+	  alternative
+	* EAP-SIM: fixed re-authentication not to update pseudonym
+	* EAP-SIM: use Notification round before EAP-Failure
+	* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
+	* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
+	* EAP-AKA': fixed identity for MK derivation
+	* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
+	  breaks interoperability with older versions
+	* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
+	* changed ANonce to be a random number instead of Counter-based
+	* added support for canceling WPS operations with hostapd_cli wps_cancel
+	* fixed EAP/WPS to PSK transition on reassociation in cases where
+	  deauthentication is missed
+	* hlr_auc_gw enhancements:
+	  - a new command line parameter -u can be used to enable updating of
+	    SQN in Milenage file
+	  - use 5 bit IND for SQN updates
+	  - SQLite database can now be used to store Milenage information
+	* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
+	  and reauth data
+	* added support for Chargeable-User-Identity (RFC 4372)
+	* added radius_auth_req_attr and radius_acct_req_attr configuration
+	  parameters to allow adding/overriding of RADIUS attributes in
+	  Access-Request and Accounting-Request packets
+	* added support for RADIUS dynamic authorization server (RFC 5176)
+	* added initial support for WNM operations
+	  - BSS max idle period
+	  - WNM-Sleep Mode
+	* added new WPS NFC ctrl_iface mechanism
+	  - removed obsoleted WPS_OOB command (including support for deprecated
+	    UFD config_method)
+	* added FT support for drivers that implement MLME internally
+	* added SA Query support for drivers that implement MLME internally
+	* removed default ACM=1 from AC_VO and AC_VI
+	* changed VENDOR-TEST EAP method to use proper private enterprise number
+	  (this will not interoperate with older versions)
+	* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
+	  specific elements to be added to the Beacon and Probe Response frames
+	* added support for configuring GCMP cipher for IEEE 802.11ad
+	* added support for 256-bit AES with internal TLS implementation
+	* changed EAPOL transmission to use AC_VO if WMM is active
+	* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
+	  correctly; invalid messages could have caused the hostapd process to
+	  terminate before this fix [CVE-2012-4445]
+	* limit number of active wildcard PINs for WPS Registrar to one to avoid
+	  confusing behavior with multiple wildcard PINs
+	* added a workaround for WPS PBC session overlap detection to avoid
+	  interop issues with deployed station implementations that do not
+	  remove active PBC indication from Probe Request frames properly
+
 2012-05-10 - v1.0
 	* Add channel selection support in hostapd. See hostapd.conf.
 	* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
diff --git a/wpa_supplicant/ChangeLog b/wpa_supplicant/ChangeLog
index 650b8a0e7..6a5ab17a3 100644
--- a/wpa_supplicant/ChangeLog
+++ b/wpa_supplicant/ChangeLog
@@ -1,5 +1,229 @@
 ChangeLog for wpa_supplicant
 
+????-??-?? - v2.0
+	* removed Qt3-based wpa_gui (obsoleted by wpa_qui-qt4)
+	* removed unmaintained driver wrappers broadcom, iphone, osx, ralink,
+	  hostap, madwifi (hostap and madwifi remain available for hostapd;
+	  their wpa_supplicant functionality is obsoleted by wext)
+	* improved debug logging (human readable event names, interface name
+	  included in more entries)
+	* changed AP mode behavior to enable WPS only for open and
+	  WPA/WPA2-Personal configuration
+	* improved P2P concurrency operations
+	  - better coordination of concurrent scan and P2P search operations
+	  - avoid concurrent remain-on-channel operation requests by canceling
+	    previous operations prior to starting a new one
+	  - reject operations that would require multi-channel concurrency if
+	    the driver does not support it
+	  - add parameter to select whether STA or P2P connection is preferred
+	    if the driver cannot support both at the same time
+	  - allow driver to indicate channel changes
+	  - added optional delay=<search delay in milliseconds> parameter for
+	    p2p_find to avoid taking all radio resources
+	  - use 500 ms p2p_find search delay by default during concurrent
+	    operations
+	  - allow all channels in GO Negotiation if the driver supports
+	    multi-channel concurrency
+	* added number of small changes to make it easier for static analyzers
+	  to understand the implementation
+	* fixed number of small bugs (see git logs for more details)
+	* nl80211: number of updates to use new cfg80211/nl80211 functionality
+	  - replace monitor interface with nl80211 commands for AP mode
+	  - additional information for driver-based AP SME
+	  - STA entry authorization in RSN IBSS
+	* EAP-pwd:
+	  - fixed KDF for group 21 and zero-padding
+	  - added support for fragmentation
+	  - increased maximum number of hunting-and-pecking iterations
+	* avoid excessive Probe Response retries for broadcast Probe Request
+	  frames (only with drivers using wpa_supplicant AP mode SME/MLME)
+	* added "GET country" ctrl_iface command
+	* do not save an invalid network block in wpa_supplicant.conf to avoid
+	  problems reading the file on next start
+	* send STA connected/disconnected ctrl_iface events to both the P2P
+	  group and parent interfaces
+	* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
+	* added "SET pno <1/0>" ctrl_iface command to start/stop preferred
+	  network offload with sched_scan driver command
+	* merged in number of changes from Android repository for P2P, nl80211,
+	  and build parameters
+	* changed P2P GO mode configuration to use driver capabilities to
+	  automatically enable HT operations when supported
+	* added "wpa_cli status wps" command to fetch WPA2-Personal passhrase
+	  for WPS use cases in AP mode
+	* EAP-AKA: keep pseudonym identity across EAP exchanges to match EAP-SIM
+	  behavior
+	* improved reassociation behavior in cases where association is rejected
+	  or when an AP disconnects us to handle common load balancing
+	  mechanisms
+	  - try to avoid extra scans when the needed information is available
+	* added optional "join" argument for p2p_prov_disc ctrl_iface command
+	* added group ifname to P2P-PROV-DISC-* events
+	* added P2P Device Address to AP-STA-DISCONNECTED event and use
+	  p2p_dev_addr parameter name with AP-STA-CONNECTED
+	* added workarounds for WPS PBC overlap detection for some P2P use cases
+	  where deployed stations work incorrectly
+	* optimize WPS connection speed by disconnecting prior to WPS scan and
+	  by using single channel scans when AP channel is known
+	* PCSC and SIM/USIM improvements:
+	  - accept 0x67 (Wrong length) as a response to READ RECORD to fix
+	    issues with some USIM cards
+	  - try to read MNC length from SIM/USIM
+	  - build realm according to 3GPP TS 23.003 with identity from the SIM
+	  - allow T1 protocol to be enabled
+	* added more WPS and P2P information available through D-Bus
+	* improve P2P negotiation robustness
+	  - extra waits to get ACK frames through
+	  - longer timeouts for cases where deployed devices have been
+	    identified have issues meeting the specification requirements
+	  - more retries for some P2P frames
+	  - handle race conditions in GO Negotiation start by both devices
+	  - ignore unexpected GO Negotiation Response frame
+	* added support for libnl 3.2 and newer
+	* added P2P persistent group info to P2P_PEER data
+	* maintain a list of P2P Clients for persistent group on GO
+	* AP: increased initial group key handshake retransmit timeout to 500 ms
+	* added optional dev_id parameter for p2p_find
+	* added P2P-FIND-STOPPED ctrl_iface event
+	* fixed issues in WPA/RSN element validation when roaming with ap_scan=1
+	  and driver-based BSS selection
+	* do not expire P2P peer entries while connected with the peer in a
+	  group
+	* fixed WSC element inclusion in cases where P2P is disabled
+	* AP: added a WPS workaround for mixed mode AP Settings with Windows 7
+	* EAP-SIM: fixed AT_COUNTER_TOO_SMALL use
+	* EAP-SIM/AKA: append realm to pseudonym identity
+	* EAP-SIM/AKA: store pseudonym identity in network configuration to
+	  allow it to persist over multiple EAP sessions and wpa_supplicant
+	  restarts
+	* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
+	  breaks interoperability with older versions
+	* added support for WFA Hotspot 2.0
+	  - GAS/ANQP to fetch network information
+	  - credential configuration and automatic network selections based on
+	    credential match with ANQP information
+	* limited PMKSA cache entries to be used only with the network context
+	  that was used to create them
+	* adjusted bgscan_simple fast-scan backoff to avoid too frequent
+	  background scans
+	* removed ctrl_iface event on P2P PD Response in join-group case
+	* added option to fetch BSS table entry based on P2P Device Address
+	  ("BSS p2p_dev_addr=<P2P Device Address>")
+	* added BSS entry age to ctrl_iface BSS command output
+	* added optional MASK=0xH option for ctrl_iface BSS command to select
+	  which fields are included in the response
+	* added optional RANGE=ALL|N1-N2 option for ctrl_iface BSS command to
+	  fetch information about several BSSes in one call
+	* simplified licensing terms by selecting the BSD license as the only
+	  alternative
+	* added "P2P_SET disallow_freq <freq list>" ctrl_iface command to
+	  disable channels from P2P use
+	* added p2p_pref_chan configuration parameter to allow preferred P2P
+	  channels to be specified
+	* added support for advertising immediate availability of a WPS
+	  credential for P2P use cases
+	* optimized scan operations for P2P use cases (use single channel scan
+	  for a specific SSID when possible)
+	* EAP-TTLS: fixed peer challenge generation for MSCHAPv2
+	* SME: do not use reassociation after explicit disconnection request
+	  (local or a notification from an AP)
+	* added support for sending debug info to Linux tracing (-T on command
+	  line)
+	* added support for using Deauthentication reason code 3 as an
+	  indication of P2P group termination
+	* added wps_vendor_ext_m1 configuration parameter to allow vendor
+	  specific attributes to be added to WPS M1
+	* started using separate TLS library context for tunneled TLS
+	  (EAP-PEAP/TLS, EAP-TTLS/TLS, EAP-FAST/TLS) to support different CA
+	  certificate configuration between Phase 1 and Phase 2
+	* added optional "auto" parameter for p2p_connect to request automatic
+	  GO Negotiation vs. join-a-group selection
+	* added disabled_scan_offload parameter to disable automatic scan
+	  offloading (sched_scan)
+	* added optional persistent=<network id> parameter for p2p_connect to
+	  allow forcing of a specific SSID/passphrase for GO Negotiation
+	* added support for OBSS scan requests and 20/40 BSS coexistence reports
+	* reject PD Request for unknown group
+	* removed scripts and notes related to Windows binary releases (which
+	  have not been used starting from 1.x)
+	* added initial support for WNM operations
+	  - Keep-alive based on BSS max idle period
+	  - WNM-Sleep Mode
+	* added autoscan module to control scanning behavior while not connected
+	  - autoscan_periodic and autoscan_exponential modules
+	* added new WPS NFC ctrl_iface mechanism
+	  - added initial support NFC connection handover
+	  - removed obsoleted WPS_OOB command (including support for deprecated
+	    UFD config_method)
+	* added optional framework for external password storage ("ext:<name>")
+	* wpa_cli: added optional support for controlling wpa_supplicant
+	  remotely over UDP (CONFIG_CTRL_IFACE=udp-remote) for testing purposes
+	* wpa_cli: extended tab completion to more commands
+	* changed SSID output to use printf-escaped strings instead of masking
+	  of non-ASCII characters
+	  - SSID can now be configured in the same format: ssid=P"abc\x00test"
+	* removed default ACM=1 from AC_VO and AC_VI
+	* added optional "ht40" argument for P2P ctrl_iface commands to allow
+	  40 MHz channels to be requested on the 5 GHz band
+	* added optional parameters for p2p_invite command to specify channel
+	  when reinvoking a persistent group as the GO
+	* improved FIPS mode builds with OpenSSL
+	  - "make fips" with CONFIG_FIPS=y to build wpa_supplicant with the
+	    OpenSSL FIPS object module
+	  - replace low level OpenSSL AES API calls to use EVP
+	  - use OpenSSL keying material exporter when possible
+	  - do not export TLS keys in FIPS mode
+	  - remove MD5 from CONFIG_FIPS=y builds
+	  - use OpenSSL function for PKBDF2 passphrase-to-PSK
+	  - use OpenSSL HMAC implementation
+	  - mix RAND_bytes() output into random_get_bytes() to force OpenSSL
+	    DRBG to be used in FIPS mode
+	  - use OpenSSL CMAC implementation
+	* added mechanism to disable TLS Session Ticket extension
+	  - a workaround for servers that do not support TLS extensions that
+	    was enabled by default in recent OpenSSL versions
+	  - tls_disable_session_ticket=1
+	  - automatically disable TLS Session Ticket extension by default when
+	    using EAP-TLS/PEAP/TTLS (i.e., only use it with EAP-FAST)
+	* changed VENDOR-TEST EAP method to use proper private enterprise number
+	  (this will not interoperate with older versions)
+	* disable network block temporarily on authentication failures
+	* improved WPS AP selection during WPS PIN iteration
+	* added support for configuring GCMP cipher for IEEE 802.11ad
+	* added support for Wi-Fi Display extensions
+	  - WFD_SUBELEMENT_SET ctrl_iface command to configure WFD subelements
+	  - SET wifi_display <0/1> to disable/enable WFD support
+	  - WFD service discovery
+	  - an external program is needed to manage the audio/video streaming
+	    and codecs
+	* optimized scan result use for network selection
+	  - use the internal BSS table instead of raw scan results
+	  - allow unnecessary scans to be skipped if fresh information is
+	    available (e.g., after GAS/ANQP round for Interworking)
+	* added support for 256-bit AES with internal TLS implementation
+	* allow peer to propose channel in P2P invitation process for a
+	  persistent group
+	* added disallow_aps parameter to allow BSSIDs/SSIDs to be disallowed
+	  from network selection
+	* re-enable the networks disabled during WPS operations
+	* allow P2P functionality to be disabled per interface (p2p_disabled=1)
+	* added secondary device types into P2P_PEER output
+	* added an option to disable use of a separate P2P group interface
+	  (p2p_no_group_iface=1)
+	* fixed P2P Bonjour SD to match entries with both compressed and not
+	  compressed domain name format and support multiple Bonjour PTR matches
+	  for the same key
+	* use deauthentication instead of disassociation for all disconnection
+	  operations; this removes the now unused disassociate() wpa_driver_ops
+	  callback
+	* optimized PSK generation on P2P GO by caching results to avoid
+	  multiple PBKDF2 operations
+	* added okc=1 global configuration parameter to allow OKC to be enabled
+	  by default for all network blocks
+	* added a workaround for WPS PBC session overlap detection to avoid
+	  interop issues with deployed station implementations that do not
+	  remove active PBC indication from Probe Request frames properly
+
 2012-05-10 - v1.0
 	* bsd: Add support for setting HT values in IFM_MMASK.
 	* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.